Camel® Maxxx 900 Sewer and Catch Basin Cleaner

Camel® Maxxx 900 Sewer and Catch Basin Cleaner

The latest addition to Super Products’ popular line of Camel® sewer and catch basin cleaners, the Camel Maxxx 900 offers a 1000 gallon water tank set-up and 9-yard capacity debris collector body to provide continuous, effective performance as well as many convenience and time-saving features.

The Camel Maxxx 900 offers:

  • Front control panel used the latest in digital technology with a large 7” color digital display
  • Industry’s most technologically advanced water pump capable of 100 GPM, 3000 PSI.
  • Hose reel that extends 18” and capable of 270° rotation, lockable in any position.
  • Hot shift blower engagement now standard on the front control panel.
  • Optimal boom movement capable of  26′ reach from centerline of unit; 217° hydraulic worm gear rotation, lockable in any position; 21’  vertical lift; and 4’ downward pivot from horizontal position

Request A Quote

Camel Maxxx 900 Features


  • Lighter weight unit design is capable of carrying large payloads
  • Up to 40% reduction in fuel usage compared to dual-engine units
  • 15% lower operating rpm than other single-engine unit


  • 7″ Color digital display operation screen with advanced diagnostic and troubleshooting capabilities
  • 8 button sealed keypad for vac mode/dump mode, vacuum pump engagement, vent door, vacuum booster, wastewater recycling, winter recirculation, boom lights and work lights
  • Vacuum increase/decrease dial
  • Water pressure and flow dial
  • Emergency stop
  • LED panel lights enables readability in dark environments


  • Total water capacity of 1000 gallons
  • Constructed of non-cross linked polyethylene, a repairable material if tank is ever damaged
  • 4″ rear mounted, stainless steel crossover enables quick filling of tanks. Replenish 1000 gallon water supply in less than 10 minutes!


  • Double acting, single piston hydraulic powered water pump offers 1:1 oil to water ratio and rated design capacity of 100 gpm and 3000 psi continuous duty
  • Heavy-duty industrial, cast iron groove lock water piping for maximum durability and long lasting life
  • Nitrogen-charged accumulators equipped with on/off valve allow operators to selectively activate blockage busting feature
  • For easy serviceability, water pump does not have to be removed from chassis


  • 270° manual rotation facilitates manhole entry and reduces traffic flow interruption. Rotation occurs between the headlights and in a centered position at all times, keeping the operator out of traffic
  • 18″ hydraulic extension offers maximum flexibility for manhole set-up
  • Reel capacity of 1000′ of 1″ hose or 600′ of 1 ¼” hose
  • For improved water flow efficiency, 1 ¼” plumbing from water pump to reel core
  • In addition to using the joy stick, a wireless remote can rotate the reel. Combined with the hands-free automatic level wind system, the wireless remote makes for the easiest front-reel unit to operate on the market today


  • 18″ to 27″ hg; 3000 to 4600 cfm
  • Vacuum pump direct shaft driven from transfer case without use of belts, poly chains or intermediate hydraulic or hydrostatic systems. Efficiently transfers engine horse power to vacuum system
  • Heavy-duty, industrial size cyclone separator located between positive displacement vacuum pump and debris tank with a 16″ diameter clean out door for easy maintenance. Cyclone has 2012 cubic inch internal operating size
  • Lower operating rpm results in lower dba levels
  • Low maintenance


  • 8″ vacuum system with a heavy-duty, channel reinforced elbow for maximum durability. For easy replacement, the boom elbow is bolted
  • Boom capable of 25′ reach from centerline of unit; 217° hydraulic worm gear rotation, lockable in any position; 26’ (4.5°) vertical lift; and 4’ (9°) downward movement from horizontal position
  • 8′ hydraulic boom extension is a true telescoping “tube inside of tube” design which will extend and retract without affecting vertical position of the working end. Boom structural support tubes are equipped with ultra high-density polyethylene slides to reduce friction and do not require grease lubrication


  • Total debris capacity of 9 cubic yards
  • Cylindrical-shaped body constructed of abrasion and corrosion-resistant 1/4″ Exten steel for added strength
  • Four mechanical, wedge-style, hydraulically operated tailgate latches secure rear debris tank door. Latching is accomplished by a single hydraulic cylinder with mechanical linkage, separate from door open-close cylinders. Designed so tailgate will not open if hydraulic power is lost
  • Dual make/break connection between debris inlet pipe and boom will compensate for uneven road and ground conditions by way of spring loaded and gasketed mating plates – no more drips and dribbles down the front of the tank.
  • Debris inlet pipe constructed of heavy-duty 3/8″ thick AR steel bolted to the debris tank and can be replaced without cutting or welding to replace


  • Unloading method that raises the body up to a 50° angle with a telescopic hydraulic cylinder
  • All controls for discharging debris are located curbside or on the wireless remote


  • 11′ 6″ overall height results in unit having a lower center of gravity for increased stability

Other Camel® Equipment

Camel® Maxxx 1200 Wastewater Recycling Sewer Truck

Relying on a 6-stage filtration processed the Camel Maxxx 1200 with wastewater recycling enables ope [...]

Learn More

Camel® Maxxx 1200 Ejection Unloading Sewer Truck

Featuring industry-unique ejection unloading, the Camel® Maxxx 1200 sewer and catch basin cleaner of [...]

Learn More

Camel® Maxxx 1200 Body Dump Unloading Sewer Truck

Sharing many of the same characteristics and capabilities of the ejector model, the Camel Maxxx 1200 [...]

Learn More

Camel® Maxxx 900 Sewer & Catch Basin Cleaner

For customers preferring a smaller jetter/vacuum combination sewer cleaner, the Camel Maxxx 900 has [...]

Learn More