Supersucker High Dump Vacuum Truck Parked Outside
Supersucker High Dump Vacuum Truck With Rear End Raised Halfway
Supersucker High Dump Vacuum Truck With Rear End Fully Raised

Supersucker® High Dump

Super Products’ Supersucker® industrial vacuum loaders are already designed for quick and easy material unloading, but the optional high dump system makes material unloading into various containers possible.  The superior design of the high dump system allows the Supersucker® to retain its signature low center of gravity, high-capacity filtration, and 51° dump angle.

The unit is kept in a normal, horizontal position during transit and vacuuming operations, ensuring even loading of material and full utilization and capacity of the large, 18 cubic yard capacity collector body.  The design of the high dump system allows the collector body to be unloaded with or without raising the rear of the unit, so normal unloading jobs remain unaffected.  When needed, the rear of the unit can be easily raised to be positioned over containers for high dumping just as quick and convenient as normal unloading.

Just like the original Supersucker®, the high dump system allows baghouse and separator dust to be emptied simultaneously when unloading the collector body, never compromising baghouse filtering capacity during the process.

Request A Quote


• 35’ (10.67 m) approximate overall length

• 12’10” (3.91 m) approximate overall height

• 8’ (2.44 m) approximate overall width


• 8” (20.3 cm) positive displacement vacuum system offers 5800 cfm/28” hg (9854 m3 /hr/0.95 bar)

• Heavy-duty transfer case drive


• Single mode filtration enables loading of wet or dry material with no changeover required

• Reverse air pulsation system continuously cleans the 60 snap-ring type, acrylic-coated filter bags

• Easy filter access on top of unit for filter bag change-out; large side door access to baghouses allows for quick bag removal

• One (1) large cyclone with large passageways for greater airflow, greater performance and greater fuel economy


• 18 cu yd (13.8 m3 ) payload capacity

• 1/4” (6.35 mm) steel construction throughout entire body and filter chambers

• Body dumping is achieved by one heavyduty, telescopic double-acting cylinder that provides a 51° dump angle. The body, baghouses and separator chamber hydraulically raise together, allowing for quick unloading of material

• Full opening tailgate with two lift cylinders. The hydraulic tailgate latching system is liquid tight and prevents leakage in case of hydraulic malfunction. Latches and hinges are fully adjustable.

Other Supersucker® Equipment


Featuring a low maintenance design, the industry’s original Supersucker offers superior air flow per [...]

Learn More

Supersucker® Arctic

A popular choice with contractors working throughout the coldest regions of North America, the Arcti [...]

Learn More

Supersucker® High Dump

The high dump system model relies on a unique hydraulic setup that allows operators to easily raise [...]

Learn More